RPL for Certificate III in Electrical Machine Repair

Certificate III in Electrical Machine Repair is awarded on 1060 points, not on a count of units — every unit you claim is worth a stated number of them. Through Recognition of Prior Learning, each unit is assessed on evidence of work you have already done rather than on training you sit through.

What the assessment looks at

Every unit sets out what you must be able to do and what you must know. An assessor works through them one at a time, asking the same question each time: does this person's evidence show they can do this reliably, in a real workplace, recently enough to count?

You can read the full requirements for UEE30625 on the national training register. They are public, and worth a look before you spend anything — if the units describe work you have never done, RPL is not your route.

Evidence worth gathering before you start

• Photos of completed jobs, ideally showing a few stages of the same job, with their original dates intact.
• Job sheets, dockets, work orders or site diaries covering a spread of jobs.
• Supervisors, employers or clients who will confirm specifically what you did.
• Any licences or tickets you already hold.

How the guided process works

You work through the units one at a time, talking about jobs you have actually done, until what you have claimed is worth 1060 points. You can speak rather than type. Add photos as you find them, and stop whenever you like — progress saves itself, and most people spread this over weeks while they dig out records. At the end you have an evidence portfolio your RTO's assessor can work through.

What this does not do

It does not assess you, and it cannot promise you UEE30625. An assessor at a registered training organisation makes that decision and may require further evidence or training. What a complete portfolio buys you is a fair assessment rather than a rejection over paperwork.

See what UEE30625 involves →

The 1060 points you need, and the 41 units you can earn them from

Certificate III in Electrical Machine Repair is awarded on points, not on a count of units. The 21 core units are compulsory and are worth 880 points between them; the remaining 180 come from the 20 electives below, and they are not worth the same as each other — how many units you end up doing depends entirely on which you pick. Read both lists before you spend anything — it is the fastest way to tell whether RPL is your route. If most of this describes work you have done, you have a case to make. If whole sections describe work you have never touched, an assessor will say so, and doing the course is the honest answer.

Worth knowing: 27 of them have a prerequisite unit, so the order you gather evidence in matters.

Core units — everyone does these

• UEECD0007 — Apply work health and safety regulations, codes and practices in the workplace
• UEECD0016 — Document and apply measures to control WHS risks associated with electrotechnology work
• UEECD0019 — Fabricate, assemble and dismantle utilities industry components
• UEECD0020 — Fix and secure electrotechnology equipment
• UEECD0043 — Solve problems in direct current circuits
• UEECD0051 — Use drawings, diagrams, schedules, standards, codes and specifications
• UEECO0028 — Engage in instrumentation, control, machine or switchgear work and competency development
• UEEEL0004 — Carry out basic repairs to electrical components and equipment
• UEEEL0017 — Repair and maintain mechanical components of electrical machines
• UEEEL0019 — Solve problems in direct current (d.c.) machines
• UEEEL0020 — Solve problems in low voltage a.c. circuits
• UEEEL0021 — Solve problems in magnetic and electromagnetic devices
• UEEEL0023 — Terminate cables, cords and accessories for low voltage circuits
• UEEEL0024 — Test and connect alternating current (a.c.) rotating machines
• UEEEL0025 — Test and connect transformers
• UEEEL0033 — Conduct electrical tests on LV electrical machines
• UEEEL0056 — Place and connect electrical coils
• UEEEL0068 — Rewind three phase low voltage induction machines
• UEEEL0074 — Wind electrical coils
• UEERE0001 — Apply environmentally and sustainable procedures in the energy sector
• UEERL0004 — Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring

Electives — you choose from these

• BSBOPS203 — Deliver a service to customers
• CPCWHS1001 — Prepare to work safely in the construction industry
• HLTAID009 — Provide cardiopulmonary resuscitation
• HLTAID011 — Provide First Aid
• ICTICT214 — Operate application software packages
• UEECD0011 — Comply with scheduled and preventative maintenance program processes
• UEECD0035 — Provide basic instruction in the use of electrotechnology apparatus
• UEECO0002 — Maintain documentation
• UEECO0015 — Provide quotations for installation or service jobs
• UEECO0017 — Source and purchase material/parts for installation or service jobs
• UEECS0033 — Use engineering applications software on personal computers
• UEEEL0034 — Conduct mechanical tests on electrical machines and components
• UEEEL0055 — Overhaul and repair major switchgear and control gear
• UEEEL0066 — Rewind LV direct current machines
• UEEEL0067 — Rewind single phase machines
• UEEIC0013 — Develop, enter and verify discrete control programs for programmable controllers
• UEERA0091 — Service small electrical appliances and power tools
• UEERL0001 — Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
• UEERL0002 — Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.
• UEERL0005 — Locate and rectify faults in low voltage (LV) electrical equipment using set procedures

Each unit breaks down further into elements and performance criteria — the specific things you have to be able to show. The guide works through them one unit at a time and asks about jobs you have actually done, rather than making you read the register yourself.

Related qualifications

Same training package, and a common second choice for people who find this one is not quite their trade:

• Certificate III in Computer Systems Equipment (UEE30225, 1060 points)
• Certificate III in Custom Electronics Installations (UEE30320, 1060 points)
• Certificate III in Data and Voice Communications (UEE30425, 1060 points)
• Certificate III in Electronics and Communications (UEE30920, 1060 points)
• Certificate III in Fire Protection Control (UEE31025, 1060 points)
• Certificate III in Switchgear and Controlgear (UEE30725, 1060 points)

More RPL in electrotechnology and energy

Every qualification in this industry, which of them have a guide ready, and what assessors here accept as evidence: RPL in electrotechnology and energy.

When you are ready, see what UEE30625 costs and what the guide asks you for, or read what counts as evidence and how RPL compares with doing the course.