RPL for Certificate III in Mechanical Rail Signalling

Certificate III in Mechanical Rail Signalling takes 18 units. Through Recognition of Prior Learning, each unit is assessed on evidence of work you have already done rather than on training you sit through.

What the assessment looks at

Every unit sets out what you must be able to do and what you must know. An assessor works through them one at a time, asking the same question each time: does this person's evidence show they can do this reliably, in a real workplace, recently enough to count?

You can read the full requirements for TLI31921 on the national training register. They are public, and worth a look before you spend anything — if the units describe work you have never done, RPL is not your route.

Evidence worth gathering before you start

• Photos of completed jobs, ideally showing a few stages of the same job, with their original dates intact.
• Job sheets, dockets, work orders or site diaries covering a spread of jobs.
• Supervisors, employers or clients who will confirm specifically what you did.
• Any licences or tickets you already hold.

How the guided process works

You work through the 18 units one at a time, talking about jobs you have actually done. You can speak rather than type. Add photos as you find them, and stop whenever you like — progress saves itself, and most people spread this over weeks while they dig out records. At the end you have an evidence portfolio your RTO's assessor can work through.

What this does not do

It does not assess you, and it cannot promise you TLI31921. An assessor at a registered training organisation makes that decision and may require further evidence or training. What a complete portfolio buys you is a fair assessment rather than a rejection over paperwork.

See what TLI31921 involves →

The 18 units you complete, chosen from these 36

You do not do all 36. Certificate III in Mechanical Rail Signalling is 11 core units, which everyone does, plus 7 chosen from the 25 electives below. Read both lists before you spend anything — it is the fastest way to tell whether RPL is your route. If most of this describes work you have done, you have a case to make. If whole sections describe work you have never touched, an assessor will say so, and doing the course is the honest answer.

Worth knowing: 1 of them have a prerequisite unit, so the order you gather evidence in matters.

Core units — everyone does these

• RIICCM201E — Carry out measurements and calculations
• RIICCM203E — Read and interpret plans and job specifications
• TLIB3046 — Service and clean mechanical signalling equipment and infrastructure
• TLIB3047 — Repair and adjust mechanical signalling equipment and infrastructure
• TLIB3048 — Carry out off-site repair, overhaul and assembly of mechanical signalling equipment
• TLIB3053 — Maintain mechanical signalling locking and interlocking devices
• TLIB3120 — Test mechanical signalling equipment and isolate faults
• TLIE0002 — Process workplace documentation
• TLIF2062 — Apply awareness of safeworking rules and regulations
• TLIK2010 — Use infotechnology devices in the workplace
• TLIS3005 — Install mechanical infrastructure for signalling

Electives — you choose from these

• HLTAID009 — Provide cardiopulmonary resuscitation
• NWPCAD002 — Control vegetation on a site
• RIIHAN301E — Operate elevating work platform
• RIIWHS202E — Enter and work in confined spaces
• RIIWHS204E — Work safely at heights
• RIIWHS205E — Control traffic with stop-slow bat
• TAEASS412 — Assess competence
• TAEDEL311 — Provide work skill instruction
• TLIB0009 — Provide first-level rail network wayside technical support remotely
• TLIB1093 — Clean equipment and restore worksite
• TLIE2007 — Use communications systems
• TLIE2029 — Conduct workplace information briefings
• TLIF0008 — Apply safety critical communications in the rail environment
• TLIF0020 — Safely access the rail corridor
• TLIF2006 — Apply accident-emergency procedures
• TLIF3013 — Coordinate breakdowns and emergencies
• TLIF3058 — Apply safeworking rules and regulations to rail functions
• TLIG0002 — Lead a work team
• TLIG0003 — Work effectively with others in a team
• TLII0005 — Apply customer service skills
• TLIS2004 — Install and maintain rail bonding systems
• TLIS3023 — Erect and mount structures and housings for signalling equipment
• TLIW0006 — Heat and cut materials using oxy-LPG equipment for the rail industry
• TLIX0013X — Maintain stock control and receivals
• UETDRMP006 — Perform pole top rescue

Each unit breaks down further into elements and performance criteria — the specific things you have to be able to show. The guide works through them one unit at a time and asks about jobs you have actually done, rather than making you read the register yourself.

Related qualifications

Same training package, and a common second choice for people who find this one is not quite their trade:

• Certificate III in Driving Operations (TLI31222, 15 units)
• Certificate III in International Freight Forwarding (Operator) (TLI31321, 13 units)
• Certificate III in Mobile Crane Operations (TLI30122, 23 units)
• Certificate III in Passenger Train Guard (TLI30521, 20 units)
• Certificate III in Stevedoring (TLI30219, 13 units)
• Certificate III in Supply Chain Operations (TLI30325, 14 units)

More RPL in transport and logistics

Every qualification in this industry, which of them have a guide ready, and what assessors here accept as evidence: RPL in transport and logistics.

When you are ready, see what TLI31921 costs and what the guide asks you for, or read what counts as evidence and how RPL compares with doing the course.